Accurate And Durable Precession Vortex low Meter

The Precession Vortex Flow Meter is widely used in petroleum, chemical, electric power, metallurgy, urban gas supply and other industries to measure various gas flows, and is currently the preferred product for oil field and urban natural gas transmission and distribution measurement and trade measurement.  Environmental conditions of use.Our company's electromagnetic flowmeter, Precession Vortex Flowmeter, Thermal Gas Mass Flowmeter and other products are very high measurement accuracy, balance flowmeter, Nozzle Flowmeter are often used, our products are also very professional.

Installation suggestions  :

 In order to avoid measurement errors caused by trapping gases and damage to PTFE and rubber linings caused by vacuum, install Flowmeters as shown below:  

★ It should be installed at the lower part of the horizontal pipeline and the vertical upward part, and avoid installation at the highest and vertical downward part of the pipeline  

★ Horizontal pipe, should be installed in the pipe slightly raised  

★ In the open discharge pipe installation, should be installed in the lower part of the pipe  

★ If the pipe drop exceeds 5m, install an exhaust valve downstream of the Flow Meter  

★ The control valve or cut-off valve should be installed downstream of the flow meter, and should not be installed upstream of the flow meter  

★ The flow meter must not be installed at the inlet of the pump, should be installed at the outlet of the pump